Trutex — это бренд цифровой печатной ткани, который производится в Турции и экспортируется по всему миру. Ткани Trutex предназначены для УФ, латексной, сублимационной и транферной печати. Высококачественные ткани Trutex Digital имеют сертификаты B1 – огнестойкости и экологичности. Мы, не стоим на месте и постоянно работаем над качеством и линейкой нашей продукции. Для предоставления образцов или заказа тканей Trutex, пожалуйста, свяжитесь с TekstilBox!
Rapido N-FR Trutex 150
| COMPOSITION | 100% Polyester |
| WEIGHT | 180 gr/m² (± 5%) |
| WIDTH | 320 - 505 cm |
| WHITENESS | >100 |
| TYPE | UV / Latex |
| FLAME RETARDANCY | B1 |
| APPLICATIONS | Lightbox, Display Frame Systems, Pop-up Display Systems, Inflatables, Tents, Parasols |
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Rapido N Trutex 149
| COMPOSITION | 100% Polyester |
| WEIGHT | 180 gr/m² (± 5%) |
| WIDTH | 110 - 260 - 320 cm |
| WHITENESS | >100 |
| TYPE | UV / Latex |
| FLAME RETARDANCY | - |
| APPLICATIONS | Lightbox, Display Frame Systems, Pop-up Display Systems, Inflatables, Tents, Parasols |
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Rapido N-505 Trutex 149
| COMPOSITION | 100% Polyester |
| WEIGHT | 180 gr/m² (± 5%) |
| WIDTH | 505 cm |
| WHITENESS | >100 |
| TYPE | UV / Latex |
| FLAME RETARDANCY | - |
| APPLICATIONS | Lightbox, Display Frame Systems, Pop-up Display Systems, Inflatables, Tents, Parasols |
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Rapido Transfer Trutex 147
| COMPOSITION | 100% Polyester |
| WEIGHT | 190 gr/m² (± 5%) |
| WIDTH | 320 cm |
| WHITENESS | >110 |
| TYPE | UV / Latex / ECO Solvent / Sublimation Transfer / Sublimation Direct |
| FLAME RETARDANCY | DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
| APPLICATIONS | Lightbox, Display Frame Systems, Pop-up Display Systems, Blow-ups |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Lightbox P Trutex 131
| COMPOSITION | 100% Polyester |
| WEIGHT | 130 gr/m² (± 5%) |
| WIDTH | 320 cm |
|
| >100 |
|
| UV / Latex / Solvent |
|
| M1 / B1 / CA 1237 Sm / NFPA 701 |
|
| Lightbox, Display Frame Systems |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Micro Double Satin Trutex 111
| COMPOSITION | 100% Polyester |
| WEIGHT | 250 gr/m² (±5%) |
| WIDTH | 310 cm |
|
| >145 |
|
| Sublimation Transfer / Sublimation Direct |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Lightbox, Display Frame Systems, Projection Front |
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Micro Satin Trutex 102
| COMPOSITION | 100% Polyester |
| WEIGHT | 155 gr/m² (±5%) |
| WIDTH | 152 - 255 - 310 cm |
|
| >130 |
|
| Latex / Sublimation Transfer / Sublimation Direct |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B / M1* |
|
| Lightbox, Display Frame Systems |
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Flash Ultra Trutex 120
| COMPOSITION | 100% Polyester |
| WEIGHT | 210 gr/m² (±5%) |
| WIDTH | 260-310-320 cm |
|
| >130 |
|
| UV / Latex / Sublimation Transfer / Sublimation Direct |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Lightbox, Display Frame Systems |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Photo 185 Trutex 124
| COMPOSITION | 100% Polyester |
| WEIGHT | 185 gr/m² (±5%) |
| WIDTH | 315 cm |
|
| >100 |
|
| UV / Latex / Eco Solvent |
|
| Display frame system, Advertising banner |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
DSP 180 Trutex 104
| COMPOSITION | 100% Polyester |
| WEIGHT | 185 gr/m² (±5%) |
| WIDTH | 315 cm |
|
| >130 |
|
| Sublimation Direct / Sublimation Transfer / Latex |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Display frame system, Advertising banner |
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
DSP 210 Trutex 105
| COMPOSITION | 100% Polyester |
| WEIGHT | 210 gr/m² (±5%) |
| WIDTH | 160 - 260 - 320 cm |
|
| >130 |
|
| Sublimation Direct / Sublimation Transfer / Latex |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Display Frame Systems, Banners |
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Elasto Trutex 112
| COMPOSITION | 100% Polyester |
| WEIGHT | 245 gr/m² (±5%) |
| WIDTH | 310 cm |
|
| >130 |
|
| Sublimation Direct / Sublimation Transfer / Latex |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Elastic Decoration, Chair Covers, Covering curved frame |
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Flag Trutex 125
| COMPOSITION | 100% Polyester |
| WEIGHT | 115 gr/m² (±5%) |
| WIDTH | 320 cm |
|
| >150 |
|
| Sublimation Direct / Sublimation Transfer |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Flag |
The information is based on the evaluation of carefully performed tests and practical experience. Due to the different conditions occurring during printing, test prints should be made. A binding assurance of the properties can not to be given for the reasons mentioned above.
Premium Canvas Trutex 113
| COMPOSITION | 55% Cotton, 45% Polyester |
| WEIGHT | 310 gr/m² (±5%) |
| WIDTH | 310 cm |
|
| >85 |
|
| UV / Latex |
|
| Framed artwork, art reproduction |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
Blackback Soft Trutex 123
| COMPOSITION | 100% Polyester |
| WEIGHT | 240 gr/m² (±5%) |
| WIDTH | 160 - 260 - 320 cm |
|
| >90 |
|
| UV / Latex / ECO Solvent |
|
| DIN 4102 B1 / NFPA 701 / BS 5867 Part 2 Type B |
|
| Frame systems with black backside |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
**Latex Ink backlight results are limited
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Blackback-V Trutex 151
| COMPOSITION | 100% Polyester |
| WEIGHT | 235 gr/m² (± 5%) |
| WIDTH | 320 cm |
|
| >90 |
|
| Treatment applied for Sub Paper / Direct Sub. / Latex / UV-Curable |
|
| - |
|
| Display Roll Up Systems / Stage Decoration Backdrop / Frontlie / Roller Blind |
The information is based on the evaluation of carefully performed tests and practical experience.Due to the different conditions occurring during printing, test prints should be made.A binding assurance of the properties can not to be given for the reasons mentioned above.
Acoustic Trutex 148
| COMPOSITION | 100% Polyester |
| WEIGHT | 220 gr/m² (±5%) |
| WIDTH | 155 - 310 cm |
|
| >120 |
|
| UV / Sublimation Transfer / Sublimation Direct / Latex |
|
| DIN 4102-1 B1 |
|
| Lightbox, Display Frame Systems |
*Uv-inks could cause curling and test prints for suitability must always be carried out before actual printing job
The information is based on the evaluation of carefully performed tests and practical experience.
Due to the different conditions occurring during printing, test prints should be made.
A binding assurance of the properties can not to be given for the reasons mentioned above.
